|
Special Features! Special features are incorporated into each advertising
balloon for sale.
| |
- Tough PVC Coated DuraLife Fabric
- Double Stitched on all joints, seams and layovers
- Special Tension Leech seams
- Added D-Links every 500 mm
- Extra D-Links for top rim securing
- Extra D-Links on Cup for securing
- Rotational Fan (inside Cup) with correct venting
- Extra Vinyl Weight Bags for line securing
- Extra Vinyl Weight Bags for Cup securing
- Extra Vinyl Weight Bags for Floor Mat
- 20 x Oversize 10mm Ropes x 8 metres long with heavy duty latch attachment snap hook.
- Large Vinyl Carry Bag
|
| |
|
| Important Feature: Please
note, we also supply you with an industrial
630 m3/hr blower. This stronger blower is rated 2 (two) times required capacity for volumetric balloon size. Powerful 780W torque
driven motor and Class A insulation with max 3500 rpm. The blower will attach to the inside wall of the lower cup. Ensure all electricals are safely
operated and do not operate where hazards occur. |
| |
| Important Note: Installation
of tie ropes to fixed pegs, posts or metal anchors or permanent eye hooks or permanent weights is recommended. We are unable
to offer cleats / hooks to suit your event situation and cannot supply individual fittings. Fittings such as 10mm eye plates, hooks etc are normally
available from major hardware retailers. |
| |
| Important Note: Whilst an
advertising balloon is one of the best advertising mediums you can purchase, inherent risk is involved and you should ensure any installation and
operation is performed safely at all times. |
| |
|
| |
The 7 metre high balloon is designed for grass / ground applications where manned control is available. Included
in the pack is lots of additional ropes, weight bags etc and the blower air pump is attached inside the cup.
Lots of banner sign tie off points every 500 millimetres and reinforced snap clips. Use the top reinforced
clips for securing your balloon. This kit also includes weight bags, elastic hooks and a base mat.
Tie banners around the belly circumference or sectional facing your best viewing direction. Lots of banner
sign tie points are included.
Additional ropes and weight bags are also included. Fit your balloon using stakes, pegs, cleats or tie points
and use weight bags.
Large advertising area encircles the belly allowing you to use maximum size banner signs.
Base mat, weight bags and elastic ropes.
Heavy duty parts and reinforcing sections.
The special fitting design inside the balloon cup means your electricals are inside and not exposed to heavy
rain. Any moisture is drawn inside and blown dry.
Snap hook ends and crimped double folded expanders give your ropes longer life. Other ends are tied onto a
cleat or solid base.
Kit includes twenty (20) ropes and snap hooks, twenty (20) weight bags
|
Special Notices: May 2012... 
The best value outdoor advertising kit ever! 
